ProVent Down Draft Tables

ProVent Intercept Downdraft Table

ProVent Intercept PDB

Cartridge Down Draft Table

Brochure ProVent PDB Downdraft Table Brochure

 

Standard Features

  • Integral Vertical Cartridge Filter System
  • Single Cartridge Cam Locking Door
  • Integral Fan, Motor and Reverse Pulse Cleaning
  • No Ductwork Hook-Ups Necessary – Easily Relocated or Repurposed
  • Integral Fork Slots
  • High Velocity at the Work Deck
  • 80 / 20 Blend Cellulose / Polyester Pleated Cartridge Filters, Efficiency 99.8% to 1/2 Micron
  • Fibergrate Work Deck

Optional Features

  • Custom Hoods / Lighting
  • Adjustable Foot Rests
  • Hood Crane Slots / Insulation

Applications

  • Manual Finishing Operations
  • Manual Deburring
  • Manual Sanding
  • Weighing and Measuring

INTERCEPT™ PDB Down Draft Table

Standard Sizes

24″ Depth Models

  • 24″ x 24″ 1500 CFM Downdraft Bench
  • 24″ x 36″ 2000 CFM Downdraft Bench
  • 24″ x 48″ 3000 CFM Downdraft Bench
  • 24″ x 60″ 3500 CFM Downdraft Bench
  • 24″ x 72″ 4000 CFM Downdraft Bench
  • 24″ x 96″ 6000 CFM Downdraft Bench

36″ Depth Models

  • 36″ x 24″ 1500 CFM Downdraft Bench
  • 36″ x 36″ 2000 CFM Downdraft Bench
  • 36″ x 48″ 3000 CFM Downdraft Bench
  • 36″ x 60″ 3500 CFM Downdraft Bench
  • 36″ x 72″ 4000 CFM Downdraft Bench
  • 36″ x 96″ 6000 CFM Downdraft Bench

* Custom Sizes Available

Capture Velocity

Capture velocity (FPM) at the bench ranges from 384 FPM to 614 FPM depending on the model. Optional higher FPM is available.

On all units, an integral exhaust fan assembly is installed in the clean air plenum. All controls, push button, and signal lights are prewired and premounted in a NEMA 12 control with overload protection.

SINGLE CARTRIDGE ACCESS DOOR

INTERCEPT™ PDB Down Draft Bench design allows for access to the entire dirty air chamber for cleaning.

INTERCEPT™ PDB Filter change out is through a single cartridge plenum access door and is easily accomplished without
the necessity of removing several doors or covers. The entire unit interior is visible when servicing the filter
chamber.

OPTIONAL UNIQUE SPARK ARRESTER PRE-FILTER SYSTEM

INTERCEPT™ PDB Down Draft Bench offers an optional unique Spark Arrester pre-filter system, which
filters out oils and large, abrasive particles from directly impinging on the filter elements. Contaminated air
enters the dust collector in a downward flow at a controlled velocity. Spark Arrester filters are removable
and washable.

INTERCEPT™ PDB Down Draft Table comes standard with a digital sequencer/timer with internal dP pressure switch* and off-line option, 2.5″ wg pulse start,
1.5″ wg pulse stop, 5 cycles on stop for offline blowdown, 80-90 PSI required, 120V/1Ph/60Hz
required.

Each cartridge filter is cleaned by a reverse high pressure pulse of air flow through the filter center. This ‘pulse’ of reverse air flow blows the accumulated dust off the outside of the filter cartridges to be collected in the drawer below.

ProVent PDB Downdraft Table with sidewalls

Detailed Look at a PDB
Cam-Loc Filter Replacement System

24x36 Intercept PDB

Powerful Downdraft table for Industry

(2) Intercept PDB Down Draft Tables With Special Work Deck Sizes for Haas Automation

Downdraft table with high flow at the work deck.

Care In Packaging For Shipment Is So Important!

ProVent Professional Ventilation Professionals