Provent - Environmental Work Cell

ENVIRO-CELL Vertical Cartridge Work Booths are work spaces designed to isolate and capture contaminants where welding, grinding, sanding, and mixing operations are conducted. Fugitive dust, smoke and fumes are removed from the open production area and contained within the booth. The Enviro- Cell eliminates the need for central dust collection systems and provides a clean, safe working environment. Housekeeping is restricted to the interior of the booth. The work area is continuously cleaned by PulseMax Cartridge Filters offering filtration capabilities of 99.8% efficiency down to 0.5 microns. Air discharge is recirculated back into the environment. Knocked down Booth Panels are custom designed to meet customer specifications. Capture velocities can vary; however, recommended standard velocities at the open end of an open booth design are normally 120-130 fpm. Both Back Sections are completely contained and constructed of heavy steel plate in an all-welded assembly ready for immediate use. Pulse-Max standard paper filter cartridges utilize a unique lock-up mechanism for filter seal, allowing for quick change and removal of filter media when required. Access to the filter section of the system is through the aluminum louver intake sections on the front. Fans are belt driven and backward curved, reducing noise and increasing horsepower efficiency. The compressed air manifold for filter blowdown is nested inside the unit for convenient system installation against an existing wall or corner. Pulse Controls are standard, complete with Photohelic Gauge monitoring, and supplied with a timer in a NEMA 12 control box. Motor controls, if supplied, are housed in the same control box for ease of connection. Standard system sizes range from 6,000 to 16,000 cfm, with custom capacities also available. Note: A clean, dry compressed air supply source is required.

ONE-PIECE HOUSING
FRONT ACCESS TO
INTERNAL COMPONENTS
SINGLE FAN, MOTOR, DRIVE & MOTOR CONTROL PACKAGES
CUSTOM BOOTH CONSTRUCTION AVAILABLE

Model EWC-12 Booth Back Section

12 Ga. Back Section, all welded construction • Finish primed and painted industrial acrylic enamel
• Integral belt-drive, high efficiency fan assemblies (EWC 8-16)
• TEFC Blower/Motor sized for system capacity (per chart)
• Diaphragm and solenoid valves (qty. per chart) for
• filter blowdown
• Standard booth design face velocity: 120-130
• PulseMax pleated cellulose cartridge filters, 496 ft2
• and 254 ft2 capacity cartridge
• Removable aluminum louvered intake panels
• Dust drawers with access from booth side
• Nested compressed air manifold (See Note)
• Standard Primary Voltage: 460Volt/3Phase/60Hertz
• Pulse Controls with Magnahelic Gauge in NEMA 12 Cabinet
• Purge Control Voltage: 120 Volt/1-Phase/60 Hertz
• Lighting and Control Voltage: 120 Volt/1-Phase/60Hertz