ProScrub Wet Dust Collectors – Economy

ProScrub
Wet Type Dust Collectors

Brochure Brochure

 

Standard Features

  • 800 CFM to 3,000 CFM Standard
  • Direct Drive TEFC Motor
  • 10 Gauge, Solid Welded Steel Construction
  • Standard Flange Inlets, 6″, 7″, 9″, 10″, or 12″
  • Galvanized Mist Eliminators
  • NEMA 12 Start / Stop Controls

Optional Features

  • 305 Stainless Steel Construction
  • Hopper Tank Section on Legs

Applications

  • Metal Finishing
  • Food Processing
  • Pharmaceutical Processes
  • Combustible Metal Finishing Operations
  • Bag Dump, Weighing, Food or Biodegradable Material Applications

Contact ProVent

Your Name (required)

Your Email (required)

Subject

Your Message

Please enter the text below
captcha


ProScrub Wet Type Dust Collectors are designed for safe ventilation of finishing, graining, sanding, grinding, and mixing processes.

ProScrub Wet Dust Collectors provide excellent air filtration efficiency through an advanced, internal scrub process at an affordable price.

The patented scrub is accomplished using airflow to create a series of water curtains which trap and remove dust particles from the inbound dirty air stream. Clean air passes through a final stage mist eliminator filtration pack and exhausts out the top of the unit. There are no spray-nozzles or pumps to clog or foul the performance of the machine.

Simple, powerful, and compact — these rugged machines will provide low-maintenance and dependable performance for years!

ProScrub is a heavy-gauge, industrial piece of equipment that will perform and last. Others you will find are thin-gauge, commercial-grade products – with gimmicks (like “sludge removal tool”) and will not last.

Sizes range from 1200 CFM to 3,000 CFM.

Standard Features include a large removable Lexan view port for monitoring sludge and water levels as well as the scrub action. Bolted cover plates allow access to the fan and mist eliminator sections of the machine.

A large brass mechanical float valve is pre-calibrated at the factory to add water as needed for consistent operating level accuracy. The tank is easily accessible for sludge clean-out via a large, pin-hinged, removable access door mounted on a 40-degree plenum. There is also a generous 2” drain at the tank bottom for draining and additional clean-up.

These machines are modeled after the well-known Uni-Wash Wet Type Dust Collector product line that has been an industry standard for over 75 years!

SPECIFICATIONS
Models: PS-1200, PS-1800, PS-2500, PS-3000
Fan: Backward Curved, Injection Molded, High Strength GRP Polymide (efficient, quiet, strong, corrosion-proof)
CFM Air Volume: 1200, 1800, 2500, 3000
Total Static Pressure: 7″, 9″, 8″, 7″
External Static Pressure: 4″, 6″, 5″, 4″
Horse Power: 2, 5, 5, 5
Voltage: 230/460V/3Ph/60Hz
Water Level Control: Mechanical Brass Float Valve Construction: 10 Gauge & 3/16″, Solid Welded

Optional Stainless Steel construction Available
Internal Corrosion Protection: Amer-Lock 2-Part Epoxy
External Finish Coating: PPG Durethane Mastic

ProVent ProScrub Wet Dust Collectors

ProScrub model PS-2500 showing top of unit where cleaned air exhausts..

ProScrub model PS-2500 showing top of unit where cleaned air exhausts..
Great shot of the Injection Molded GRP Polyamide Impeller - non-corroding, stronger than steel!
Great shot of the Injection Molded GRP Polyamide Impeller – non-corroding, stronger than steel!