ProVent Uni-Wash™ UC
Ducted Wet Dust Collectors 500 – 3,000 CFM
The most efficient wet dust collectors on the market, the Uni-Wash series of dust collectors are capable of collecting dust down to 3 micron in size utilizing only 3″ wg.
Wet type dust collection is required for the safe collection of combustible metal dust. Wet Type Dust Collection has also been used effectively in many other difficult applications in place of cartridge collectors. ProVent’s unique scrub design has been an industry standard for over 40 years and continues to lead the industry in Wet Type Dust Collection efficiency.
Call us today to find out more about how wet dust collection can be used in your application: 800-610-6010
- Orifice / Impingement Patented Scrub Never Clogs
- Stainless Steel Scrub Components
- Integral High Efficiency Fan Assemblies
- Solid Welded Construction
- No Filters to Replace
- Many Available Options to Customize
- Metal Finishing
- Food Processing
- Pharmaceutical Processes
- Biomedical Manufacturing
- Shot Peening, Sand Blasting
|Ext. SP (in. Wg)||5||4||6||5||4|
|Motor / Fan RPM||3450||3450||3450||3450||3450|
|TEFC Motor, HP||1.5||2||5||5||5|
|Primary Voltage||460Volt 3 Phase 60 Hertz|
|Full Load Amps||2.6||3.4||7.6||7.6||7.6|
|Dry Weight (lbs)||400||650||720||850||960|
|Tank Capacity (US GAL)||20||42||87||97||113|
|Fresh Water Connection||3/4" NPT, Female|
|Drain Connection||1 1/4" NPT, Female|
|Integral Fans||AMCA Rated|
|Injection Molded GRP Polyamide Backward Curved Airfoil
Spark Resistant, Corrosion-proof, Stronger than Steel / Half the Weight / Lower HP
|Housing Construction||7, 10 and 12 gauge, 3/16" and 1/4" plate, Solid Welded|
|Scrub Components||304 Stainless Steel|
|Internal Tank Coating||AmerLock-2 by Ameron is a 2-Part Epoxy that provides exceptional corrosion protection in harsh industrial & marine corrosive environments|
|External Coating||Durethane DTM by PPG is a direct-to-metal Urethane Mastic coating that is chemically resistant and extremely durable. It provides excellent corrosion resistance and has superior color and gloss retention, excellent adhesion, UV protection|
|Water Level Control||Mechanical Float Type, Optional Electronic Differential Pressure, 4-Point with Automatic Fill and High/Low Fill and Shutdown, 2 Photohelics, integral to control panel|
|Motor Controls||NEMA 12 Start/Stop Station with overload protection, Optional Face Mounted Combination Starter Package with Disconnect, Buttons, Lights on units purchased with Electronic, 4-Point Water Level Control. Optional NFPA Package adds Airflow Switch with Auxillary Contact for connection to dust producing equipment, Horn, Light for NFPA compliance. Variable Frequency Drive available.|
The NFPA package enables customers to fully comply with NFPA 484 guidelines for combustible metals such as aluminum, titanium, magnesium and others. By strictly adhering to NFPA guidelines, our wet dust collectors provide for shutting down the collector AND the dust producing equipment via control panel interlock on water level and airflow warnings.
*NFPA 22.214.171.124.1 The power supply to the dust-producing equipment shall be interlocked with the airflow from the exhaust blower and the liquid-level controller for the collector so that improper functioning of the dust-collection system will shut down the equipment it serves.
ProVent Silencers reduce the noise level produced by the exhausted air.
The Sani-Ball cleaning system utilizes powerful spray nozzles to simplify the cleaning process
All ProVent equipment is available in painted or unpainted stainless steel. Popular with the food processing industry, stainless steel provides cleanliness and longevity to the equipment.
Ducted Systems < 4000 CFM can be raised on legs and drained from the bottom of the dust collector.
Variable Frequency Drives (VFD) are available on all ducted Uni-Wash machines. VFD’s give customers the ability to adjust airflow.